Basement Waterproofing

Among all the homeowners in today nation, some have never looked or thought about the surroundings their home basement floors and walls. Most people these days do not know that their basement floors and walls are the main foundation of their homes.

Basement waterproofing is important to do in order to protect the safe upkeep of your house. If you don’t take action to maintain your basement waterproof walls and floors in your basement, your basement walls and foundation of your home can become seriously damaged. Some can even crack and leak, leaving the structure of your house with severe damage.

It’s very important to research and evaluate the leaky basement Toronto before you begin your basement waterproofing. Be on point that the ground floor next to the foundation slopes away from your house foundation, not toward it. If you want to, put dirt up against the foundation in the basement to make at least a 2” per foot slope away from the foundation.

The next step, you need to check your spouts and gutters to make sure that all of them clean. Make sure that you check your downspouts and they are discharging water at minimum 5 feet away from the foundation in your basement. Also, watch out for bushes or plants that are very close to the area of the foundation because the roots can create a pathway for outside water to get into your basement.

We can now look into the area surrounding your basement, the time to start the entire process of waterproofing in your basement. Begin to waterproof your own walls with a item such as called Drylok or even Xypex. If you have small or intermittent leakages you need to use this product. Keep in mind that Drylok is a water proofer. It won’t work as a water sealer.

This product will expand because it dries. It will become cover the damage area of the wall when it completely dried. The product Xypex is like putting a waterproof concrete to the surface of the cracks. This will bond as well as repair the surface of your walls.

Follow the directions and repair defects cracks that poured concrete basement walls and the area where the tie rods and pipes go. Do this all the way through the concrete. The cracks on the walls will not structural movement experience any structural movement as well as thermal. Fast Plug made by The Drylok is fast and effective for sealing all the cracks in the masonry.

Another good reliable way to fix a wall crack with the injection of a epoxy grade product so that it will penetrate in the crack all the way from inside the concrete and outside as well. In some cases if you have big water problems you should consider using a system called a French drain. This is a continuous system of the pipes that cross under the floor of your basement and together with the complete border of your basement.

If you think that this task of basement waterproofing your home is to much for you? You can always hire a contactor to do this job for you. You would to find someone who has good experience in basement waterproofing and provide hydroclay around the exterior of your current foundation.

Hydroclay is really a waterproofing edition of bentonite clay-based. It’s noted for being able to soak up large amounts of water. The contactor will pump the clay in from the exterior. The clay-based fulfills in voids and follows the pathways which water uses to obtain inside your foundation, completely sealing the actual basement.

As you know, basement waterproofing is a big detailed process. If you know that you need to waterproof your basement in your home, it’s very important to take the right steps that are provided here to ensure that your house basement can be waterproofed correctly.

Leave a Comment

Your email address will not be published. Required fields are marked *